VIP™ Driver
VIP™ Driver
VIP™ Driver is at the heart of the VIP™ video display system, acting as the interface between any DVI or HDMI video source and all MVP™ or PVP™ video panels via the LED Studio software (provided free). Rack-mountable, it has two signal outputs, which connect via etherCON® to any configuration of the MVP™ or PVP™ panels. The system features a total output of 1280x1024. VIP™ Driver allows media playback, configuration, addressing, and remote power control of MVP™ and PVP™ panels.
FEATURES
- Required for panel calibration and video conversion to CHAUVET ® MVP™ and PVP™ video panels
- CHAUVET® LED Studio software connects directly to the VIP™ Driver via USB for patching and panel configuration
- Accepts either DVI or HDMI input
- 2 Neutrik® etherCON® outputs (655,360 LEDs capacity each)
- Capable of up to 1,310,720 LEDs and is scalable to link up to 4 units in a single system ?(5,242,880 LEDs total capacity)
SPECIFICATIONS
- Control Protocol: LINSN
- Data Connectors: Neutrik® etherCON® (2), USB
- Video Input: DVI-I or HDMI (requires progressive scan, not interlaced)
- Linking Connection: RS-232 (9-pin)
- Rackmount: 1U
- Required Software: CHAUVET® LED Studio (included) and Windows®7
- Software Connection: USB
- IP Rating: IP20, dry location
- Cable Length: 5 ft (1.5 m)
- Power Connection: Edison plug to IEC
- Power Input: IEC
- Maximum Supported LEDs (per VIP™ Driver): 1,310,720
- Maximum Supported LEDs (4 VIP™ Drivers total): 5,242,880
- Input Voltage: 100 to 240 VAC, 50/60 Hz (auto-ranging)
- Power and Current: 40 W, 0.33 A @ 120 V, 60 Hz
- Power and Current: 40 W, 0.19 A @ 208 V, 60 Hz
- Power and Current: 40 W, 0.17 A @ 230 V, 50 Hz
- Weight: 5 lb (2.27 kg)
- Dimensions: 19 x 10 x 1.7 in (483 x 254 x 44 mm)
- Housing Material: Aluminum alloy
- Approvals: CE, FCC